Skip to main content

Posts

ids-vs-ips-vs-siem

  https://www.bitlyft.com/resources/ids-vs-ips-vs-siem
Recent posts

HCI Buyer's guide (Sangfor)_ 2023 PeerSpot

Sangfor HCI-Hyper Converged Infrastructure Source: https://www.peerspot.com/categories/hci

Types of Firewall

 

How Do I Configure My CISCO Switch To Properly Power My PoE Client?

  How Do I Configure My CISCO Switch To Properly Power My PoE Client? Detailed Instructions   Command or Action Purpose 1 enable   Example: Switch > enable Enables privileged EXEC mode - enter your password if prompted.   2 configure terminal   Example: Switch # configure terminal Enters global configuration mode. 3 interface   interface-id   Example: Switch (config)# interface gigabitethernet2/0/1 Specifies the physical port to be configured, and enters interface configuration mode. 4 power inline  { auto  [ max   max-wattage ] |  never  | static  [ max   max-wattage ]}   Example: Switch (config-if)# power inline auto Configures the PoE mode on the port.  Keywords and meanings:    auto -  Enables powered-device detection; if enough power is available, automatically allocates power to the PoE port after device detection (default setting).    max  max-wattage - l imits the power allowed on the port; if no value is specified, the maximum is allowed.    max  max-wattage - l imits t

PoE Standards Introduction

  https://community.fs.com/blog/understanding-poe-standards-and-poe-wattage.html